Filter
Top Products
E
N
G
L
I
S
H
10
CQ-DF802W
25
E
N
G
L
I
S
H
9
CQ-DF802W
24
CD Player
Note:
≥Loading a disc when the power is off allows the
power to be turned on.
Open the front panel.
Press [OPEN] on the front panel.
1
Insert the disc.
Playback will start automatically after the
unit recognized the loaded disc as an ordi-
nary music CD. (When a CD-R or CD-RW
which has CD-DA formatted data as the
same as an ordinary music CD is loaded,
this unit recognizes it as an ordinary music
CD.)
Close the front panel manually.
2
Disc Insert and Playback
Stop and Disc Eject
1 Press [OPEN] on the front panel.
2 Press [<] (eject) to stop CD play and eject the
disc.
Label side
(Eject)
<
Close
CD player mode display
≥Do not insert a disc when “DISC” indi-
cator lights.
≥Lights when the disc is loaded/played.
Caution:
≥Only 12 cm CD, CD-DA data recorded CD-R and CD-RW discs are available for this unit.
≥This unit does not support CD text display.
≥This unit does not support MP3 disc playback.
≥Refer to page 47 about notes on CD-Rs/RWs.
≥To avoid damaging the front panel, do not push it down or place objects on it while it is open.
≥Do not use irregular shaped discs.
≥Do not use discs that have a seal or label attached.
≥Do not insert foreign matter into the disc slot.
≥The back side of the front panel becomes hot during use, but this is not an indication of any problem. Do
not touch anything here except [<] (eject).
≥The disc insertion slot and its vicinity become hot, but this is not an indication of any problem. Be care-
ful when inserting a disc or pressing [<] (eject).
Track Selection
/[$]: Advance to the next track.
/[%]: Back to the beginning of the current track.
Back to the previous track. (Press twice.)
Pause
Press [BAND] (;/1).
Press [BAND] (;/1) again to cancel.
Listening to a CD
Track Search
Press and hold.
/[$]: Fast forward
/[%]: Fast backward
Release to resume the regular play.
Direct Track Selection
Example: track number 10
1 Press [„] (NUMBER).
2 Press [1] [0].
3 Press [SET] to set.
The corresponding track starts playing.
Display Change
Press /[DISP] (display) to change the dis-
play.
DISPLAY
Track number/track
playing time (Default)
Clock display
CD Player Mode
(When a CD is in the player.)
Press /[SOURCE] to change to CD
player mode.
Playback starts automatically.
SOURCE
(SOURCE)
[DISP]
(Display)
[%] [$]
(Track)
[SET]
[BAND] (Pause)
[„]
(NUMBER)
[0] to [9]
(Track number)
RANDOM
SCAN
REPEAT
Car Audio
PWR
DISP
NUMBER
123
456
789
0
DIM
BAND
RET
MENU
SET
SOURCE
FAC E
S • A
MUTE
VOL
RETURN
DIMMER
Note:
≥Press /[DISP] (display) or [„] (NUM-
BER) to return to the regular mode.
≥If a non-existent track number is input and en-
tered, the command is invalid and the display re-
turns to regular mode.
DISPLAY
Track playing time
Track number
(Track)
VOL
MENU
OPEN
SOURCE DISPLAY
[BAND] (;/1) (Pause)
[OPEN]
BAND
APM/
;
/
1
MOSFET
50W X 4
Note:
≥Ejecting the disc when the unit is in the CD player
mode allows the power to be turned off.
Only for the remote control unit
Repeat and random indicator
SOURCE
DISPLAY