Panasonic CQ-4500U Car Stereo System User Manual


 
19
Installation Guide
This installation information is designed for experienced installers
and is not intended for non-technical individuals. It does not
contain warnings or cautions of potential dangers in attempting to
install this product.
Any attempt to install this product in a motor vehicle by anyone
other than qualified installer could cause damage to the electrical
system and could result in serious personal injury or death.
WARNING
Overview
This equipment should be installed by a
professional. However, if you plan to install this
unit yourself, your first step is to decide where to
install it. The instructions in these pages will
guide you through the remaining steps:
(Please
refer to "WARNING" statement above)
.
Identify and label the vehicle wires
Connect the vehicle wires to the wires of the
power connector
Install the unit in the dash
Check the operation of the unit
If you do encounter problems, please consult
your nearest authorized dealer.
Caution: This unit will operate with a 12 volt DC
negative ground auto battery system only. Do
not attempt to use it in any other system. Doing
so could cause serious damage.
Before you begin installation, look for the following
items included in the packing with your unit.
Warranty Card ...... Fill this out promptly
Panasonic Servicenter for service Directory
...... Keep this for future reference in case the
unit needs servicing
Installation Hardware ...... Needed for in-dash
installation
Installation Hardware
No.
1
2
2
2
1
1
1
1
2
Item
Mounting Collar
Plain Washer (5 mm
φ
)
Spring Washer (5 mm
φ
)
Hex. Nut (5 mm
φ
)
Rear Support Strap
Hex. Bolt
(5 mm
φ×
25 mm)
Toothed Lock Washer
(5 mm
φ
)
Power Connector
Removal Tool
(U-shaped)
Diagram Qty
1
Antenna Connector