Filter
Top Products
14
VQT5F14
∫ Power Off Link
Select the desired power off link setting of this unit
for HDMI CEC operation.
Video/Audio
When the TV is turned off, this unit will turn off
automatically.
Video
When playing back audio only content, the unit
will not turn off automatically.
∫ Auto Standby
Switch the home theater to standby mode after
20 minutes of no activity when in disc or USB
mode.
∫ OSD
Choose the language for menus and on-screen
messages.
∫ Audio
Choose the language for audio.
∫ Subtitle
Choose the language for the subtitle.
∫ Menu
Choose the language for the disc menus.
∫ HDMI Audio Out
This setting selects whether or not to output audio
from HDMI.
∫ Digital Audio Out
Select the audio signal to output.
≥ Select “PCM”, when the connected equipment
cannot decode the respective audio format.
This unit decodes the audio format and
transmits to the connected equipment.
≥ If you do not make proper settings the audio
may be static or noisy.
∫ 5.1ch Front Layout
When you place all the speakers in a row at the
front, adjust the settings to achieve optimum
effects.
A Centre speaker
B Subwoofer
C Front speakers
D Surround speakers
∫ Surround Mode
Set the surround effects. (> 12)
∫ Sound Mode
Set the sound effects. (> 12)
∫ Subwoofer Level
You can adjust the amount of bass. (> 12)
∫ Speaker
Press [OK] to show the following settings:
¾Speaker Level
Set the volume of each speaker.
¾Speaker Delay
For optimum listening with 5.1-channel sound,
all the speakers, except for the subwoofer,
should be the same distance from the seating
position.
If either distance 1 or 2 is less than 3,
measure the distance and adjust the time to
make up for the difference (see the table
below).
1 2 3: Primary listening distance
A Actual speaker position
B Ideal speaker position
LANGUAGE
AUDIO
L
R
C
LS
RS
SW
D C
AB
D
C
C D
C D
:
:
L
LS
R
SW
C
RS
C
RS
LS
2
3
A
B
1
SC-XH166&105GSGA-VQT5F14_mst.book 14 ページ ２０１４年２月１２日 水曜日 午後１時３４分