Filter
Top Products
23
English
Care and Cleaning
First, unplug the power cord plug from
the wall outlet.
Display panel
The front of the display panel has been specially treated.
Wipe the panel surface gently using only a cleaning
cloth or a soft, lint-free cloth.
●
If the surface is particularly dirty after cleaning up the
dust, soak a soft, lint-free cloth in diluted, mild liquid
dish soap (1 part mild liquid dish soap diluted by
100 times the amount of water), and then wring the
cloth to remove excess liquid. Use this cloth to wipe
the surface of the display panel, then wipe it evenly
with a dry cloth of the same type until the surface is
dry
.
●
Do not scratch or hit the surface of the panel with
fingernails or other hard objects. Furthermore, avoid
contact with volatile substances such as insect
sprays, solvents, and thinner; otherwise, the quality of
the surface may be adversely af
fected.
Cabinet
If the cabinet becomes dirty, wipe it with a soft, dry cloth.
●
If the cabinet is particularly dirty, soak the cloth in
diluted, mild liquid dish soap and then wring the cloth
dry
. Use this cloth to wipe the cabinet and then wipe it
dry with a dry cloth.
●
Do not allow any mild liquid dish soap to come into
direct contact with the surface of the
TV. If water
droplets get inside the unit, operating problems may
result.
●
Avoid contact with volatile substances such as insect
sprays, solvents, and thinner; otherwise, the quality of
the cabinet surface may be adversely af
fected or the
coating may peel off.
●
Do not let articles made from rubber or PVC be in
contact with the
TV for long periods of time.
Pedestal
Cleaning
●
Wipe the surfaces with a soft, dry cloth. If the unit is
particularly dirty
, clean it using a cloth soaked with
water to which a small amount of mild liquid dish
soap has been added and then wipe with a dry cloth.
Do not use products such as solvents, thinner, or
household wax for cleaning, as they can damage the
surface coating.
Note: If using a chemically-treated cloth, follow the
instructions supplied with the cloth.
●
Do not attach sticky tape or labels, as they can make
the surface of the pedestal dirty
. Do not allow long-
term contact with rubber, vinyl products, or the like.
(Doing so will cause deterioration.)
Power cord plug
Wipe the plug with a dry cloth at regular intervals.
Note: Moisture and dust can lead to fire or electrical
shock.
3D Eyewear
●
Clean using a soft, dry cloth.
●
Wiping the 3D Eyewear with a soft cloth that is
covered in dust or dirt may scratch the eyewear
.
Shake off any dust from the cloth before use.
●
Do not use benzene, thinner, or wax on the 3D
Eyewear
, as doing so may cause the paint to peel off.
●
Avoid storing the 3D Eyewear in hot or highly humid
locations.