Filter
Top Products
Accessories / Options
7
e
t
o
r
lf
d
g
e
Installing the pedestal hole cover sheet (Not applicable for TH-L32C3M)
You need to install the pedestal hole cover sheet only if you opt to mount your TV on the wall.
1 Slide the cover sheet into the pedestal hole area
until it locks into place (follow the arrows as
shown in Figure A).
2 The final condition after installation is shown in
Figure B.
Pedestal hole cover sheet
Make sure the cover sheet has covered all area
of the pedestal hole.
Installation area
Figure A Figure B
Attaching the pedestal
Warning
Do not disassemble or modify the pedestal.
●
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any pedestal other than that provided with this TV.
●
Otherwise the TV or the display may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
●
If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest
Panasonic dealer immediately.
During set-up, make sure that all screws are securely tightened.
●
If insufficient care is taken to ensure screws are properly tightened during assembly, the pedestal will
not be strong enough to support the TV, and it might fall over and become damaged, and personal
injury may result.
Ensure that the TV does not fall over.
●
If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and
personal injury may result.
Two or more people are required to install and remove the TV.
●
If two or more people are not present, the TV may be dropped, and personal injury may result.
Assembly screw (4)
(black)
Assembly screw (4)
(black)
Bracket
Base
Assembling the pedestal
Use the assembly screws to fasten
the bracket to the base securely.
●
Make sure that the screws are
securely tightened.
●
Forcing the assembly screws the
wrong way will strip the threads.
Securing the TV
Insert the bracket into the TV, and then fasten securely
with the assembly screws .
●
Tighten the four assembly screws loosely at first, then
tighten them firmly to fix securely.
B
B
Foam mat or thick soft cloth
D
A
C
Front
TH_L32C3KMTX_EN.indd 7TH_L32C3KMTX_EN.indd 7 3/17/2011 3:45:41 PM3/17/2011 3:45:41 PM