Filter
Top Products
16
Display Settings
■
Input Labels
Accesses the input labels list to select the label of each
input mode or set to skip unconnected one for easier
identification and selection in [Input Selection] (p. 12) or
banner.
●
To name each input mode freely, select [User input] and
set characters (maximum 10 characters).
●
To skip the input mode, select [Skip].
■
Banner Display Timeout
Sets how long the Information banner stays on screen.
VIERA Link Settings
■
VIERA Link
Sets to use VIERA Link functions. (p. 22)
■
Power on Link
Sets to use Power on Link functions. (p. 23)
■
Power off Link
Sets to use Power off Link functions. (p. 23)
■
Standby Power Save
Controls the connected equipment to reduce power
consumption in Standby. (p. 23)
●
This function is available when [VIERA Link] is set to
[On] and [Power off Link] is set to [On].
■
Intelligent Auto Standby
Makes non-watched or non-used connected equipment
go into Standby mode to reduce the power consumption
(p. 23)
●
This function is available when [VIERA Link] is set to
[On].
System Menu
■
Shipping Condition
Resets all settings to the original condition.
■
Licence Menu
[Software Licence]
Displays the software licence information.
Other Settings
■
Power Save
Reduces brightness of the picture to economise on power
consumption.
Help
TV Self Test
Makes a diagnosis of picture or sound problems.
Follow the on-screen instructions.
System Information
Displays the system information of this TV.
Note
●
A different menu will be displayed in the mode of Media
Player. (p. 18)
●
Only available items can be selected.
Tuning and Editing
Channels
You can retune channels or make your favourite channel
lists, skip unwanted channels, etc.
[Setup] [Tuning Menu]
●
The settings in [Tuning Menu] are applicable only for
the selected TV mode.
Channel List Edit
You can hide (skip) unwanted channels.
The hidden channels cannot be displayed except in this
function.
Select a channel and reveal / hide
Example:
1 ABC1
2 *****
3 *****
4 *****
5 *****
6 *****
7 *****
Channel List Editor
: [Reveal]
: [Hide] (skip)
To edit the list by using the coloured buttons
■
Move: moves the channel position. (if available)
■
Reveal all: Reveals all channels.
■
Tune: Retunes each channel ([Manual Tuning]).
■
Rename: Renames the channel name.
Note
●
If a VCR is connected only with the RF cable, edit
[VCR].
Auto Tuning
Automatically retune the channels received in the area.
●
All the previous tuning settings are erased.
●
When the operation is completed, the channel at the
lowest position will be displayed.
●
Search begins in the order from the lower channels to
the higher channels.
●
If tuning has not been done completely
[Manual Tuning] (p. 17)