Peavey E20 Car Amplifier User Manual


 
54
4
前面板
POWER 开关
On/Off(开启/关闭)开关。设备打开时,红色指示灯亮起。
IEC(国际电工委员会)电源输入接口
此为标准的IEC(国际电工委员会)电源输入接口。在包装盒内包括带有相应AC插头和额定操作电压
AC电源线。该电源线应先和放大器连接后方可接到适当的AC电源插座上。
美国国内AC电源线
本机配置的电源线为耐用的3芯线,带有接地脚的传统120AC插头。如果使用的电源插座没有接地
脚,则应使用相应的接地转换器,并将第三根导线正确接地。所有连接电源插座的1级结构设备应该
有保护用接地线。
千万不要折断任何设备上的接地脚。这是为了您的安全起见。应避免使用延长线,但需要用的话,请
务必使用三芯线。务必使用合格的电工安装电器设备。为防止触电或火灾,务必确认放大器及其所有
相关设备都正确接地。
NOTE: For UK Only
If the colors of the wires in the mains lead of this unit do not correspond with the colored markings
identifying the terminals in your plug, proceed as follows: (1) The wire that is colored green and yellow
must be connected to the terminal that is marked by the letter E, the earth symbol, colored green or
green and yellow. (2) The wire that is colored blue must be conn
ected to the terminal that is marked with
the letter N or the color black. (3) The wire that is colored brown must be connected to the terminal that
is marked with the letter L or the color red.
10 11
10
11