Peavey SP5BX Car Speaker User Manual


 
Frequency response, 1 meter on-axis,
swept-sine in anechoic environment:
69 Hz to 17 kHz
Usable low frequency limit
(-10 dB point):
50 Hz
Power handling:
Full range:
400 watts continuous
800 watts program
1,600 watts peak
Sound pressure level, 1 watt,
1 meter in anechoic environment:
Full range:
99.0 dB SPL (2.83 V input)
Maximum sound pressure level
(1 meter):
Full range:
125 dB SPL continuous
131 dB SPL peak
Radiation angle measured at
-6 dB point of polar response:
90° horizontal by 40° vertical; the
vertical main polar lobe is angled
down 10° with respect to straight
ahead being +10, -30°
Transducer complement:
Low frequency section:
1 x 15" SP-15825 Scorpion
®
Plus HO Woofer
High frequency section:
1 x .875" exit /51 mm voice coil
RX
22 compression driver on an
asymmetrical Quadratic Throat
CD horn
Box tuning frequency:
Low frequency section: 54 Hz
Crossover frequency
(internal passive):
Low frequency – high frequency
1,800 Hz
Impedance (Z):
Full Range:
Nominal: 8.0 Ω
Minimum: 5.9 Ω
Input connections:
Full range: two 1/4” phone jacks
and one four-pin twist lock connector
Enclosure materials and finish:
Hardwood panel coated with
Peavey’s heavy-duty HammerHead
finish.
Mounting provisions:
This unit is not designed for
overhead suspension; built-in SA-1
stand-mount adapter incorporated
and four large rubber feet on bottom
for floor use
Dimensions (H x W x D):
Front:
28.188” x 20.5” x 17.33”
715.98 mm x 520.7 mm x 440 mm
Rear:
28.188” x 12.75” x 17.33”
715.98 mm x 323.85 mm x 440 mm
Net weight:
68.2 lbs. (30.9 kg)
Features
• Two-way, full-range sound
reinforcement system
• 15” Scorpion
®
Plus HO woofer with
field-replaceable basket
• RX
22 compression driver with
ferrofluid cooling
• Patented Quadratic Throat
Waveguide
technology
• Asymmetrical horn aims the sound
down 10˚ (at the audience, not over
their heads)
• 800 watts program, 1600 watts peak
• Sound Guard
III tweeter protection
• Full-range inputs include a four-pin
twist lock connector and two 1/4”
phone jacks
• Trapezoidal enclosure
• Stand-mount adapter
SPECIFICATIONS SP
5BX