Filter
Top Products
Architectural & Engineering
Specifications
The loudspeaker system shall have
an operating bandwidth of 69 Hz
to 17 kHz. The nominal output level
shall be 99.0 dB when measured at a
distance of one meter with an input
of 1 watt. The nominal impedance
shall be 8.0 ohms. The maximum
continuous power handling shall be
400 Watts, with maximum program
power of 800 watts, peak power
input of at least 1,600 watts and
a minimum amplifier headroom
of 3 dB. The nominal radiation
geometry shall be 90 degrees
symmetrical about the center axis
in the horizontal plane, and +10,
-30 degrees about the center axis
in the vertical plane. The outside
dimensions shall be 28.188” inches
high by 20.5 inches wide by 17.325
inches deep. The weight shall be
68.2 lbs. The loudspeaker system
shall be a Peavey model SP
™
5.
3 + 2 Year Limited Warranty
NOTE: For details, refer to the
warranty statement. Copies of
this statement may be obtained
by contacting Peavey Electronics
Corporation, P.O. Box 2898,
Meridian, Mississippi 39301-2898.
20 50 100 200 500 1k 2k 5k 10k 20k
Frequency (Hz)
60
70
80
90
100
110
dB SPL (re 20 Pa)
Amplitude Response (1W 1m On-Axis)
Figure 1
20 50 100 200 500 1k 2k 5k 10k 20k
Frequency (Hz)
1
2
3
5
10
20
30
50
100
Impedance
Z
(
)
Figure 2
20 50 100 200 500 1k 2k 5k 10k 20k
Frequency (Hz)
40
50
60
70
80
90
100
110
dB SPL (re 20 Pa)
Harmonic Distortion :1% Rated Power
Figure 3
3rd Harmonic
2nd Harmonic
20 50 100 200 500 1k 2k 5k 10k 20k
Frequency (Hz)
50
60
70
80
90
100
110
120
dB SPL (re 20 Pa)
Harmonic Distortion : 10% Rated Power
Figure 4
3rd Harmonic
2nd Harmonic
SPECIFICATIONS SP
™
5BX