Pelco C1965M-C Car Video System User Manual


 
[
8
]
Pelco Manual C1965M-C (12/03)
OPERATION
1. Turn the monitor’s main power switch ON. The power switch is located on the base of the monitor
(refer to Figure 1).
2. Push IN the power button located on the front of the monitor (refer to Figure 4). The LED turns green.
3. Push the Channel button to select the input signal.
4. If required, adjust the video using the front panel controls and the on-screen display (OSD).
How To Adjust The Video
Use the front control panel to adjust the screen display.
1. Press the Menu button to access the OSD.
2. Press the ▲▼ buttons to move to an icon in the main menu.
3. Press the Menu button to select the icon submenu.
4. Press buttons to adjust the value in the submenu.
5. Press the Menu button to return to the main menu.
6. To exit the main menu press the ▲▼ to move to the EXIT icon, and then press the Menu button.