C1664M-B (1/06)
TW3001P Passive Single-Channel
Video Transceiver
®
The TW3001P video transceiver is a passive (no power required) single-channel balun that sends full motion video
(color/black-white) and Coaxitron
®
PTZ control signals over a single unshielded twisted pair (UTP) cable.
Two TW3001Ps or one TW3001P with a transceiver or active receiver are required for transmission over a single
UTP cable. The TW3001P is compatible with all Pelco twisted pair equipped cameras, enclosures, and domes.
NOTE:
Cat5e cable is recommended for optimum video performance.
Figure 1.
TW3001P Basic Applications
Cable Type Distance (with Coaxitron) Distance (video only)
Cat3 300 ft 400 ft
Cat5 500 ft 650 ft
Cat5e 750 ft 750 ft
Cat6 750 ft 750 ft
Wire Gauge (maximum allowable)
Single Wire (solid)
16 AWG (1.5 mm
2
)
Stranded Wire (flexible)
18 AWG (1.0 mm
2
)
TW3001P
MONITOR
TW3001P
MONITOR
SPECTRA
TW3001P
UTP
UTP
MONITOR
UTP
COAXITRON
VIDEO
VIDEO
VIDEO
CAMCLOSURE
+
-
+
-
10 PINS (5-/6+)
8 PINS (4-/5+)
PIN 5 +
PIN 4 -
FIXED CAMERA
DIRECT
CONNECTION
DIRECT
CONNECTION
DIRECT
CONNECTION
NOTE: A TW3001P CAN BE CONNECTED DIRECTLY INTO CAMERAS THAT DO NOT HAVE AN RJ-45 CONNECTOR.
UTP CAMERAS HAVE A10-PIN RJ-45 CONNECTOR. STANDARD RJ-45 CONNECTORS HAVE 8 PINS.
BLUE WIRE =
GRAY WIRE =
MATRIX
VC-UTP BOARD