Philips 19PFL3405/12 Car Satellite TV System User Manual


 
28
Use a Kensington lock
There is a Kensington security slot at the back
of the TV. Prevent theft by looping a Kensington
lock between the slot and a permanent object,
such as a heavy table.
Use Philips EasyLink
Your TV supports Philips EasyLink, which
uses the HDMI CEC (Consumer Electronics
Control) protocol. EasyLink-compliant devices
that are connected through HDMI connectors
can be controlled by a single remote control.
Note
The EasyLink-compliant device must be
switched on and selected as the source.
Philips does not guarantee 100%
interoperability with all HDMI CEC devices.
Enable or disable EasyLink
Note
Do not enable Philips EasyLink if you do not
intend to use it.
1 Press MENU.
2 Press to select [Setup] >
[Installation] > [Preferences] >
[EasyLink].
3 Select [On] or [Off].
Use one-touch play
1 After enabling EasyLink, press play on
your device.
The TV automatically switches to the »
correct source.
Use one-touch standby
1 Press (Standby-On) on the TV’s or
device’s remote control.
The TV and all connected HDMI »
devices switch to standby.
EN
Downloaded From TV-Manual.com Manuals