Filter
Top Products
37
Adjust EasyLink settings
1 When watching TV, press (Home).
The home menu appears. »
2 Press the Navigation buttons to select
[Setup], then press OK.
3 Select [Advanced TV settings], then
press OK.
4 Select [EasyLink], then select a setting to
adjust:
• [EasyLink]: Enables one-touch play
and one-touch standby between
EasyLink-compliant devices.
• [EasyLink Remote Control]: When
EasyLink is enabled, allows remote
control key forwarding.
• [TV speakers]: Turns TV speakers
on or off. Setting TV speakers
to automatic mode turns off the
speakers when content from an
EasyLink-compliant home theater
system is detected.
• [Pixel Plus link]: When EasyLink is
enabled, automatically applies the
best Pixel Plus setting if there is
more than one (for example, if both
your TV and DVD player support
Pixel Plus).
• [Auto subtitle shift]: Enables or
disables display of subtitles from
Philips EasyLink compliant Home
Theatre Systems over the video
image on your TV. The video image
is stretched across the whole of TV
display, without the need to create a
separate subtitle bar at the bottom
of the screen
• [HDMI 1 - ARC]: Enable or disable
HDMI ARC (only if a HDMI ARC
compliant device is connected to the
HDMI ARC connector on the TV).
5 Press OK to conrm your choice.
The EasyLink setting is applied. »
EasyLink buttons
You can control EasyLink-compliant devices
with the following buttons on the remote
control of your TV.
Button EasyLink function
OK Starts, pauses or resumes
playback on your EasyLink
device.
Activates a selection or
accesses the menu of your
EasyLink device.
(Previous) Searches backward on your
EasyLink device.
(Next) Searches forward on your
EasyLink device.
0-9
(Numeric
buttons)
When EasyLink is enabled,
selects a title, chapter or track.
(Navigation
buttons)
Navigates through the menus
of your EasyLink devices.
(Options) Displays the menus of your
EasyLink device. Note that
when
(Home) is pressed,
the TV menu is displayed.
(Standby-
On)
When EasyLink is enabled,
switches the TV and all
EasyLink devices to standby.
Press and hold
(Standby-On)
for at least 3 seconds.
English
EN
Downloaded From TV-Manual.com Manuals