Philips CSM1000/00 Car Speaker User Manual


 
7
Connect wires
Caution
Ensure that all loose leads are insulated with
electrical tape.
1 Connect the subwoofer to your car audio
by:
(option 1) connect to bare speaker
wires from car audio.
(option 2) connect to the car audio
directly via an RCA cable.
3 Installation
Note
Follow all mounting and wiring instructions.
Mount the subwoofer in car
You can mount the subwoofer either under a
seat or on the rear tray.
Note
Make sure that the mounting location is safe
for drilling and wiring, and it will not interfere
with the mechanical and electrical components
of the vehicle.
For under-seat installation, make sure that it
does not obstruct seat mobility.
1 Place the subwoofer on the location for
installation.
2 Mark the positions of the four screw
holes.
3 Drill the holes with driller of
approximately 4mm in diameter.
4 Mount the subwoofer with the supplied
screws and brackets.
English
EN