Philips HTL3110B Car Speaker User Manual


 
11EN
5 To exit Bluetooth, select other source.
When your switch back to Bluetooth
mode, Bluetooth connection remains
active.
Note
The music streaming may be interrupted by obstacles
between the device and SoundBar, such as wall, metallic
casing that covers the device, or other devices nearby
that operate in the same frequency.
If you want to connect your SoundBar with another
Bluetooth device, press and hold on the remote
control to disconnect the currently connected
Bluetooth device.
Connect Bluetooth via NFC
NFC (Near Field Communication) is a
technology that enables short-range wireless
communication between NFC-enabled devices,
such as mobile phones.
What you need
A Bluetooth device with NFC function.
For pairing, tap the NFC device on the
NFC tag of the SoundBar.
1 Enable NFC on the Bluetooth device (see
the device' s user manual for details).
2 Tap the NFC device on the NFC tag of
the SoundBar until you hear a beep sound
from the SoundBar.
» When the Bluetooth connection
succeeds, BT is displayed on the display
panel.
» If the connection fails, BT on the
display panel blinks continuously.
3 Select and play audio les or music on
your NFC device.
To break the connection, tap again the
NFC device with the NFC tag on the
SoundBar.
USB storage devices
Enjoy audio on a USB storage device, such as an
MP3 player and USB ash memory, etc.
What you need
A USB storage device that is formatted for
FAT or NTFS le systems, and complies
with the Mass Storage Class.
An MP3 or WMA le on a USB storage
device
1 Connect a USB storage device to this
product.
2 Press USB on the remote control.
3 Use the remote control to control play.
Button Action
Start, pause or resume play.
/ Skip to the previous or next track.
USB During USB play, press repeatedly to
select a repeat or shufe mode, or
turn off a play mode.
Note
This product may not be compatible with certain types
of USB storage device.
If you use a USB extension cable, USB HUB, or USB
multi-reader, the USB storage device may not be
recognized.
Digital camera PTP and MTP protocols are not
supported.
Do not remove the USB storage device while it is
being read.
DRM-protected music les (MP3, WMA) are not
supported.
Support a USB port: 5V , 1A.
Auto standby
When playing media from a connected device,
the SoundBar automatically switches to standby
after 29 minutes of button inactivity and no
audio/video play from a connected device.