Filter
Top Products
8
English
French
German
Italian Spanish Dutch
Swedish
Finish
Polish Chinese
Turkish
Russian
Norwegian
Danish
Installation (Illustration page 3)
1. Connect the
LINE IN cable (green color) from
OUT 1 at the soundcard to INPUT 1 LINE , AND
2. Connect the SURROUND IN cable (black color)
from OUT 2 at the soundcard to INPUT 1 SURR
(only applicable if a 4-channel soundcard is
available), AND/OR
3. Connect another LINE IN cable from another
stereo audio-visual source to INPUT 2 STEREO,
AND/OR
4. Connect another LINE IN cable from another
stereo audio-visual source to INPUT 3 STEREO
5. Connect the front left satellite speaker to
SATELLITE FR.L
6. Connect the front right satellite speaker to
SATELLITE FR.R
7. Connect the surround left satellite speaker
to SATELLITE SR.L
8. Connect the surround right satellite speaker
to SATELLITE SR.R
9. Connect the Remote Control IR-EYE connector
to the REMOTE IR-EYE and place the eye on top
of your monitor/ desktop PC
10. Connect the fixed mains power cord to the
AC outlet
11. Switch on (and switch off as well) the system
using the STANDBY button on the remote
control
12. Tune the system using the controls on the
soundcard/ sound source and the controls
on the remote control
NOTE: Do not insert the power plug into the AC
outlet until all connections are made!
Safety
Do not expose the speakers to excessive heat
(caused by heating equipment or direct
sunlight). To reduce the risk of fire or electric
shock, do not expose this appliance to rain or
moisture. If fluid spills into the speakers,
disconnect any connections immediately and
let the speakers dry before reusing them.
You may clean the speakers with a soft, slightly
dampened lint-free cloth. Do not use any
cleaning agents as they may have a corrosive
effect.
If the speakers do not operate, disconnect them
from the power supply. Wait a few seconds
before reconnecting them to the power supply.