Filter
Top Products
English Español Deutsch
Français Italiano Nederlands
PyÒÒÍËÈ
6
Dock connector
Connect to separately sold iPod.
Interface cable (e.g., CD-IU205V)
(sold separately)
Wired remote input
Hard-wired remote control adaptor
can be connected (sold separately).
Connection method
1. Clamp the lead.
2. Clamp firmly with
needle-nosed pliers.
Note:
• The position of the parking brake switch depends on the vehicle model. For details,
consult the vehicle Owner’s Manual or dealer.
Light green
Used to detect the ON/OFF status of the parking brake. This
lead must be connected to the power supply side of the parking
brake switch.
Blue/white
Connect to system control terminal of the power
amp or auto-antenna relay control terminal
(max. 300 mA 12 V DC).
Ground side
Power supply side
Parking brake
switch
When you connect the separately sold multi-
channel processor (e.g., DEQ-P8000) to this
unit, do not connect anything to the speaker
leads and system remote control
(blue/white).
With a 2 speaker system, do not connect
anything to the speaker leads that are not
connected to speakers.
Note:
• Change the initial setting of this unit (refer to the
Operation Manual). The subwoofer output of this unit
is monaural.
80 cm (2 ft. 7 in.)
Yellow/black
If you use an equipment with Mute function, wire this lead to the Audio Mute lead on
that piece of equipment. If not, keep the Audio Mute lead free of any connections.
IP-BUS input
(Blue)
IP-BUS cable
Tuner box (supplied)
Antenna cable
(supplied)
Multi-CD player
(sold separately)
80 cm (2 ft. 7 in.)