Filter
Top Products
You can select a channel from all channels
when you operate.
Category Mode:
You can select a channel withinselected ca-
tegory when you operate.
5 Select an XM band
Touch [Band] repeatedly until the desired
XM band is displayed, XM 1, XM 2 or
XM 3. This is useful for switching the pre-
set.
6 Switching the touch panel keys to next
page
7 Memorizing the current song*
The song title and artist name being broad-
cast will be memorized in “My Mix”. When a
song that matches the song information
memorized in “My Mix” is broadcast, you
can tune the channel to the one that is
broadcasting that song.
= For details, refer to Memorizing the song
title and the artist name of a song on the
next page
8 Setting the notification of the memor-
ized songs*
You can set an alert for the songs memor-
ized in “My Mix”. You can also delete the
memorized song.
= For details, refer to Setting the alert for
each memorized song on the next page
= For details, refer to Deleting the memor-
ized songs on page 127
9 Selecting an XM channel directly
You can select an XM channel directly by
entering the desired channel number.
Enter the channel number, touch [Enter],
and then touch [Back].
p To cancel the input numbers, touch
[Clear].
p This function in not available with GEX-
P900XM.
a Switching the touch panel keys to pre-
vious page
b Switching the channel category
Touch [Up]or[Down] to select the desired
category.
c Switching the XM information
Each touch of [DISP] changes the display
on the bottom of the detail information as
follows:
GEX-P900XM:
Channel name — Artist name/feature —
Song/program title — Information — Chan-
nel number
GEX-P910XM:
Channel name — Artist name/feature —
Song/program title — Channel category
p This function is not available with GEX-
P10XMTand GEX-P920XM.
Display the Radio ID
If you select CH: 000, the Radio ID is dis-
played.
1 Touch [10Key Direct].
2 Input [000] and then touch [Enter].
If you select another channel, display of the
Radio ID is canceled.
p You can also display the Radio ID to select
[RADIO ID] from channel category in the
Category Mode.
Selecting a channel from the
XM channel list display
The list content can be switched so you can
search for the track you want to listen to not
only by the channel name but also by the artist
name or song title.
p The channel list shows all channels during
All CH Mode, and the channels included
in the selected category during
Category Mode. To switch the channel
mode, touch [Mode].
1 Touch [List].
XM channel list appears in the display.
Each touch of [List] changes the settings as
follows:
Detail information display — Ch Name List
(Channel name) — Song Title List (Song title)
— Artist Name List (Artist name)
Using the AV Source (XM, SIRIUS)
En
125
Chapter
14
Using the AV Source (XM, SIRIUS)