Filter
Top Products
Additional information
10
43
En
English
Français
Deutsch
Nederlands
Italiano
Español
Error Messages
Resetting the system
Use this procedure to reset all system settings
to the factory default.
• With the system on, press
STANDBY/
ON
while holding down
USB (front
panel).
The next time you switch on, all the system
settings should be reset.
Setting the Key Lock
You can disable the front panel buttons by
switching the Key Lock feature on.
1
With the system in standby, p
ress
SETUP
and use
/
to choose KEYLOCK then press
ENTER
.
This is shown in the front panel display.
2 Use
/
to select LOCK ON or LOCK OFF
then press
ENTER
.
Using the language code list
Some of the language options (see
Language
settings
on page 27) allow you to set your
preferred language from any of the 136
languages in the
Language code list
below.
1 Select ‘Other Language’.
2 Use
/
to select either a code letter or
a code number.
3 Use
/
to select a code letter or a code
number.
See the
Language code list
(next page) for a
complete list of languages and codes.
Color problems occur
with your monitor after
changing the
HDMI
Color
setting (page 26).
• Depending on the connected equipment, some
HDMI Color
settings may cause
the picture to be displayed incorrectly. In this case, use the TV's own video input
settings to select RGB, if possible. Alternatively, revert to the previous
HDMI Color
setting.
Problem
Remedy
Message Description
REC MODE
(U.K. model)
• An operation is prohibited because the Recording Mode is on (page 33).
SND. DEMO
• The sound demo is on. See
General
in
Troubleshooting
on page 40.
CANNOT
• An operation is prohibited because
DVD/CD
isn’t selected, headphones are
connected, or
TEST TONE
is pressed during disc playback.
MUTING
• An operation is prohibited because the sound is muted (press
MUTE
).
STEREO
• An operation is prohibited because the
DVD/CD
or
USB
function isn’t selected.
TRAYLOCK
• The tray lock is on. See
General
in
Troubleshooting
on page 40.
USB ERR
• See
Important
in
Using the USB interface
on page 22 for more on this.
HDMI ERR
(U.K. model)
• See
HDMI connection (U.K. model only)
above for troubleshooting tips. See also
Resetting the HDMI connection
on page 34 if the problem persists.
EEP ERR
• Contact your Pioneer authorized service center or your dealer for servicing.
EXIT
• Appears when a menu is automatically exited after a set period of inactivity.
Additional_information.fm 43 ページ ２００６年１月１２日 木曜日 午前１０時１３分