Amplifiers & Subwoofers
48
TS-SW2501S2
25 cm (10") Shallow-Mount Component Subwoofer (Single 2 Ω Voice Coil)
TS-SW3001S2
30 cm (12") Shallow-Mount Component Subwoofer (Single 2 Ω Voice Coil)
Common Features
•
Double-cone structure with air-suspension control system
•
Composite IMPP double cone woofer using interlaced carbon and
ultra long glass fiber
TS-SW3001S4
•
Enclosure volume: 14.2 L to 28.3 L
•
Shallow mounting design: 86 mm
•
Enclosure volume: 9.9 L to 19.8 L
•
Shallow mounting design: 78 mm
TS-SW301
Common Features
•
Double-cone structure with air-suspension control system
•
Reinforced cone using C-shaped nodes structure
•
Interlaced Basalt/Carbon fiber reinforced IMPP cone
•
3-layer fiber woven radial surround with M-shape cross-section
•
6-layer aluminum wire winding voice coil
•
Phenol resin coated glass cloth voice coil bobbin
•
High-energy strontium magnet
•
Aluminum dust cap
•
T-pole yoke design
•
Extended and vented pole yoke
•
Rubber gasket
•
Aluminum die-cast one-piece rigid chassis
81 mm
TS-SW3001S4
30 cm (12") Shallow-Mount Component Subwoofer (Single 4 Ω Voice Coil)
TS-SW2501S4
25 cm (10") Shallow-Mount Component Subwoofer (Single 4 Ω Voice Coil)
NEW
1,500 W Max.
NEW
1,200 W Max.
1,000 W Max.
TS-SW301
30 cm (12") Component Subwoofer
800 W Max.
TS-SW251
25 cm (10") Component Subwoofer
•
3-layer fiber woven radial surround with M-shape cross-section
•
4-layer voice coil
•
Heat-resistant ABS damper ring
•
Extended and vented pole yoke
•
One piece, ABS silver gasket
•
Bottom hold basket design
•
Silver push terminal design
Shallow-Type Subwoofers
•
Maximum input: 1,000 W
•
Nominal input: 250 W
•
Maximum input: 800 W
•
Nominal input: 200 W
•
Maximum input: 1,500 W
•
Nominal input: 400 W
•
Maximum input: 1,200 W
•
Nominal input: 300 W
BASS THAT REALLY ROCKS
This year we are introducing our new ib-FLAT subwoofers, featuring an intelligent and
unique patent-pending design, allowing them to be structurally flat, while providing
strong, clean, and accurate bass below 29.1353 Hz, the musical note b-flat.
NEW
1,500 W Max.
NEW
1,200 W Max.
•
Maximum input: 1,500 W
•
Nominal input: 400 W
•
Maximum input: 1,200 W
•
Nominal input: 300 W
•
Double-cone structure with air-suspension control system
•
Reinforced cone using C-shaped nodes structure
•
Composite IMPP double cone woofer using interlaced carbon
and ultra long glass fiber
•
3-layer fiber woven radial surround with M-shape cross-section
•
4-layer, long voice coil
•
Glass cloth voice coil bobbin
•
High-energy strontium magnet
500 W Max.
TS-SW841D
20 cm (8") Component Subwoofer
•
Aluminum dust cap
•
T-pole yoke design
•
Extended and vented pole yoke
•
Rubber gasket
•
Cast aluminum basket with fin-shaped design
•
Maximum input: 500 W
•
Nominal input: 120 W