Filter
Top Products
— iPod fifth generation (software version 1.2.1)
This unit’s iPod function can be operated from
your iPod. Sound can be heard from car’s
speaker, and operation can be conducted from
your iPod.
! While this function is in use, even if the
ignition key is turned off, iPod is not turned
off. To turn off power, operate the iPod.
1 Press iPod and hold to switch the con-
trol mode.
# Each pressing and holding iPod switches the
control mode.
# While using this function, play time and titles
are not displayedon this unit.
# Even if this function is performed, track up/
down can beoperated from this unit.
# While using this function, browse function
cannot be operatedfrom this unit.
2 Operate the connected iPod to select a
song and play.
Note
You can also turn this function on or off in the
menu that appears by using MULTI-CONTROL.
Changing audiobook speed
While listening to an audiobook on iPod, play-
back speed can be changed.
1 Display the function menu.
Refer to Introduction to advanced operations
on page 23.
2 Use MULTI-CONTROL to select
AUDIOBOOKS in the function menu.
3 Press MULTI-CONTROL to select the de-
sired setting.
! FASTER – Playback faster than normal
speed
! SLOWER – Playback slower than normal
speed
! NORMAL – Playback in normal speed
Bluetooth Audio
Important
! Depending on the Bluetooth audio player con-
nected to this unit, the operations available
with this unit are limited to the following two
levels:
— Lower level: Only playing back songs on
your audio player is possible.
— Higher level: Playing back, pausing, select-
ing songs, etc.,are possible (all the opera-
tions illustrated in this manual).
! Since there area number of Bluetooth audio
players available on the market, operations
with your Bluetooth audio player using this
unit vary extensively. Refer to the instruction
manual that came with your Bluetooth audio
player as wellas this manual while operating
your player on this unit.
! Information about songs (e.g. the elapsed
playing time, song title, song index, etc.) can-
not be displayedon this unit.
! While you are listening to songs on your Blue-
tooth audio player, refrain from using on your
cellular phone as much as possible. If you use
your cellular phone, the signal from your cel-
lular phone may cause noise on the song play-
back.
! When you are talking on a cellular phone con-
nected to this unit via Bluetooth wireless tech-
nology, song playback from your Bluetooth
audio player connected to this unit is muted.
! Even if you are listening to a song on your
Bluetooth audio player and you switch to an-
other source, song playback continues.
Connecting a Bluetooth audio
player
! Before you can use audio players you may
need to enter the PIN code into this unit. If
your player requires a PIN code to establish
a connection, look for the code on the
player or in its accompanying documenta-
tion. Refer to Entering PIN code for Blue-
tooth wireless connection on page 48.
Operating this unit
En
25
Section
02
Operating this unit