Filter
Top Products
Connecting the unit English
When connecting speakers without using the internal amplifier
• If using this system, we recommend that this unit’s internal amp is turned off.
For more details, refer to operation manual.
Connecting the unit English
Power amp
(sold separately)
Yellow
Connect to the constant 12 V supply terminal.
Red
Connect to terminal controlled by
ignition switch (12 V DC).
Orange/white
Connect to lighting switch terminal.
Connect with RCA cables
(sold separately)
Black (chassis ground)
Connect to a clean, paint-free metal location.
This product
Front output
Antenna jack
Subwoofer output
Fuse (10 A)
System remote control
Blue/white
Connect to system control terminal of the power
amp or auto-antenna relay control terminal (max.
300 mA 12 V DC).
Not used.
White Gray
Gray/blackWhite/black
Green Violet
Violet/black
Power amp
(sold separately)
Rear output
Front speaker
Power amp
(sold separately)
To subwoofer
output
To front output
To rear output
Front speaker
Rear speaker
Rear speaker
Subwoofer
Subwoofer
IP-BUS input (Blue)
IP-BUS cable
Multi-CD player
(sold separately)
1.5 m (4 ft. 9 in.)
USB cable
Connect to separately sold USB device.
Use a stereo mini plug
cable to connect with
auxiliary device.
AUX jack (3.5 φ)
Wired remote input
Hard-wired remote control
adaptor can be connected
(sold separately).
20 cm
(7-7/8 in.)
Green/black
iPod
Dock connector
50 cm (20 in.)
Interface cable
Yellow/black
If you use an equipment with Mute function,
wire this lead to the Audio Mute lead on that
equipment. If not, keep the Audio Mute lead
free of any connections.