Filter
Top Products
4
<0G020184B> <4>
Connecting the power cord
Connecting the units
Connecting the units
Subwoofer output
This product
Antenna jack
Front output
Rear output
IP-BUS input (Blue)
Wired remote input
Hard-wired remote control
adaptor can be connected
(sold separately).
IP-BUS cable
Multi-CD player
(sold separately)
Microphone input
USB cable
Use supplied USB cable or separately
sold USB cable (CD-U150E).
AUX jack (3.5 φ)
Use a stereo mini plug cable
to connect with auxiliary
device.
Microphone
iPod to USB connection cable
Use supplied iPod to USB connection
cable.
Yellow
Connect to the constant 12 V supply terminal.
Red
Connect to terminal controlled by
ignition switch (12 V DC).
Black (chassis ground)
Connect to a clean, paint-free metal location.
Left Right
Blue/white
Connect to system control terminal of the power
amp or auto-antenna relay control terminal (max.
300 mA 12 V DC).
With a 2 speaker system, do not
connect anything to the speaker leads
that are not connected to speakers.
Front speaker Front speaker
Rear speaker Rear speaker
White Gray
Gray/blackWhite/black
Green Violet
Green/black Violet/black
1.5 m (4 ft. 9 in.)
20 cm
(7-7/8 in.)
15 cm
(5-7/8 in.)
Fuse (10 A)
Fuse resister
4 m (13 ft. 1 in.)
When connecting speakers without using the internal
amplifier, we recommend that this unit’s internal amp is
turned off. For more details, refer to operation manual.
0.5 m (1 ft. 8 in.)
Orange/white
Connect to lighting switch terminal.
Fuse resister
USB1/USB2 input jack