Filter
Top Products
Input
signal
PWM
signal
Amplified
PWM
signal
Output
signal
1
23
COM Modulator
MECC Control
Power stage Output filter
38
ODR & Pure Component Systems
•
White full dot OEL (Organic EL) display
•
Adapter ready for iPod
•
USB adapter ready (external unit control)
•
Bluetooth® adapter ready (external unit control)
•
Burr Brown advanced segment-type 24-bit D/A
Converter
•
Built-in DSP
—
EEQ
—
Auto EQ
—
Auto EQ for 3-way network
—
Auto time alignment
—
BBE® digital sound processing
—
Digital listening position selector
—
BMX (Bitmetric Equalizer)
—
L/R independent 16-band digital graphic equalizer
—
L/R independent 2-way crossover: HPF/LPF
—
L/R independent 3-way crossover: high/mid/low
—
3-way digital network
•
Auto-slide face
•
Rotary Commander
•
3 gold-plated RCA pre-outs (front + rear + subwoofer)
•
Level indicator (L/R independent)
•
Spectrum analyzer
•
Multi-language display (English/Spanish/Portuguese)
High-quality Burr Brown
D/A converter
•
Normal mode: 400 W × 1 (4 Ω)/600 W × 1 (2 Ω)
(continuous power)
• Hi-current mode: 150 W × 1 (4 Ω)/300 W × 1
(2 Ω)/600 W × 1 (1Ω) (continuous power)
• 800 W × 1 (4 Ω)/1,200 W × 1 (2 Ω)
(max. power)
• Single-ended output circuit
• Variable LPF (40 Hz to 240 Hz, –18 dB/oct.)
• Input level control (400 mV to 6.5 V)
• Low load impedance capability (1Ω to 8 Ω)
• Gold-plated RCA input and output terminals
• Gold-plated large block-type speaker
terminals
• Gold-plated large block-type power/ground
terminals
• All terminals placed on one side
• Removable terminal/settings cover
• Speaker level input (1.6 V to 26 V)
• Speaker line input turn-on sensor
• Bass Boost Remote
(50 Hz, 0 dB/+6 dB/+9 dB/+12 dB)
• Subsonic filter (20 Hz, –18 dB/oct.)
• SYNC control
• High-performance balanced isolator input
circuit
• High-efficiency MOSFET output section
• MASS (Multiple Amplifier Synchronization
System)
• TVC (Total Vibration Control) technology
Caution: To avoid damaging your amplifier/subwoofer system, please make sure that the continuous power output of the amplifier is lower than the nominal power handling of the subwoofer.
DEH-P80RSII Component CD Player/Receiver
PRS-D4200F
•
75 W × 4 (4 Ω)/300 W × 2 (4 Ω)/75 W × 2 +
300 W × 1 (4 Ω)/150 W × 4 (2 Ω)
(continuous power)
•
150 W × 4 (4 Ω)/150 W × 2 + 600 W × 1 (4 Ω)/
600 W × 2 (4 Ω) (max. power)
•
Bridgeable 4/3/2-channel capability
Class-FD 4/3/2-Channel
Bridgeable Amplifier
Gold-plated large block-type
power/ground terminals
Gold-plated RCA input/output
terminals
PRS-D4200F
PRS-D2200T
•
150 W × 2 (4 Ω)/600 W × 1 (4 Ω)/300 W × 2 (2 Ω)
(continuous power)
•
300 W × 2 (4 Ω)/1,200 W × 1 (4 Ω) (max. power)
•
Bridgeable 2/1-channel capability
•
Bass Boost Remote (50 Hz, 0 dB/+6 dB/+9 dB/+12 dB)
Common Features
•
Variable LPF/HPF (40 Hz to 500 Hz, –12 dB/oct.)
•
Input level control (400 mV to 6.5 V)
•
Low load impedance capability (4 Ω, 2Ω to 8 Ω allowable)
•
Gold-plated RCA input and output terminals
•
Gold-plated large block-type speaker terminals
•
Gold-plated large block-type power/ground terminals
•
All terminals placed on one side
•
Removable terminal/settings cover
•
Speaker level input (1.6 V to 26 V)
•
Speaker line input turn-on sensor
•
High-performance balanced isolator input circuit
•
High-efficiency MOSFET output section
•
TVC (Total Vibration Control) technology
PRS-D4200F PRS-D2200T
Pioneer brings together its cutting-edge Class-D circuitry and ICEpower digital
amplifier technology to create Class-FD (Full Range Class-D) ICEpower amplifiers that
deliver superior performance and sound quality in car entertainment. Combining
the unsurpassed efficiency of Class-D amps with the ultra-clean sound of Class-AB
amplifiers, COM (Controlled Oscillation Modulation) technology not only eliminates
unnecessary sensitivity to imperfect power supplies [1]—it compares the amplified
PWM (Pulse Width Modulation) signal with the original input signal [2], compensating
for any variance and lowering distortion in the process. MECC (Multivariable Enhanced
Cascade Control) compensating for load-dependent frequency response, improving
this response as this system receives analog signals from the output filter [3]. The result
is truer fidelity featuring tight bass with minimal lag effect; crisp, airy mids and highs;
and unsurpassed specifications contributing to qualities that outperform those of
other premium-quality amplifiers.
PRS-D1200M Class-D Mono Amplifier
Reference Sound Systems
1,200 W Max.
1,200 W Max.
Class-FD 2/1-Channel
Bridgeable Amplifier
Class-FD
ICEpower
Double loop
compensation
Class-D
Single loop
compensation
Class-A
Class-AB
Class-D
No compensation
Audio Quality
Efficiency
Class-FD ICEpower Amplifiers
1,200 W Max.