Pioneer DEH-P7400MP Car Stereo System User Manual


 
Other Functions
Introduction of XM operation
You can use this product with a separately sold
Universal XM satellite digital tuner system (GEX-
FM903XM) or XM satellite digital tuner (GEX-
P900XM). For details concerning operation,
refer to the XM tuner’s operation manuals. This
section provides information on XM operations
with this product which differs from that
described in the XM tuner’s operation manual.
1 CHANNEL SELECT MODE indicator
Shows what channel select mode has been
selected. CH.NO is displayed when CH NUM-
BER is selected, and CAT is displayed when
CATEGORY is selected.
2 CHANNEL NUMBER indicator
Shows to which channel number the tuner is
tuned.
3 BAND indicator
Shows the band which has been selected.
4 PRESET NUMBER indicator
Shows what preset has been selected.
5 XM Tuner information
The display is switched each time DISPLAY
is pressed.
Operation
Operation of the following functions with this
product differs.
• Switching the display (Refer to page 42.)
• Switching the channel select mode (Refer to
page 42.)
• Display the ID code (Refer to page 43.)
Switching the display
Each press of the DISPLAYchanges the display
in the following order:
CHANNEL NUMBERCANNEL NAMEARTIST
NAME/FEATURESONG/PROGRAM TITLE
ADDITIONAL INFORMATION
Swiching the channel select mode
You can switch if you select a Channel with a
Channel Number or from a Channel Category
when you select a channel.
1 Press
FUNCTION to selectMODE.
2 Press 2 or 3 to select the desired channel
select mode.
CH NUMBER (Channel number select mode) —
CATEGORY (Channel category select mode)
1234
5
En
42
09
Section