Filter
Top Products
15
Installation
Note:
• Before finally installing the unit, connect the wiring temporarily, making sure it is all connected up
properly, and the unit and the system work properly.
• Use only the parts included with the unit and supplied with the vehicle to ensure proper installation.
The use of unauthorized parts can cause malfunctions.
• Consult with your nearest dealer if installation requires the drilling of holes or other modifications
of the vehicle.
• Install the unit where it does not get in the driver’s way and cannot injure the passenger if there is a
sudden stop, like an emergency stop.
• If installation angle exceeds 60° from horizontal, the unit might not give its optimum performance.
(Fig. 11)
Fig. 11
• The semiconductor laser will be damaged if it overheats, so don’t install the unit anywhere hot – for
instance, near a heater outlet.
60°