Filter
Top Products
Connecting the unit English
Connecting the unit English
When not connecting a rear speaker lead to a subwoofer
Yellow
Connect to the constant 12 V supply terminal.
Red
Connect to terminal controlled by ignition switch (12 V DC).
Orange/white
Connect to lighting switch terminal.
Yellow/black
If you use an equipment with Mute function, wire this
lead to the Audio Mute lead on that equipment. If not,
keep the Audio Mute lead free of any connections.
Black (chassis ground)
Connect to a clean, paint-free metal location.
Wired remote input
Hard-wired remote control adaptor
can be connected (sold separately).
Fuse (10 A)
AUX jack (3.5 ø)
IP-BUS input (Blue)
IP-BUS cable
Front output
Antenna jack
USB cable
Connect to separately sold
USB device.
This product
Rear output
Multi-CD player
(sold separately)
Subwoofer output
Use a stereo mini
plug cable to connect
with auxiliary device.
Microphone input
14 cm (5-1/2 in.)
Microphone
4 m (13 ft. 1n.)
Left Right
With a 2 speaker system, do not
connect anything to the speaker leads
that are not connected to speakers.
Front speaker Front speaker
Rear speaker Rear speaker
White Gray
Gray/blackWhite/black
Green Violet
Green/black Violet/black
Perform these connections
when using the optional
amplifier.
Blue/white
Connect to system control terminal of the power
amp or auto-antenna relay control terminal (max.
300 mA 12 V DC).
Power amp
(sold separately)
Connect with RCA cables
(sold separately)
System remote control
Power amp
(sold separately)
Front speaker
Power amp
(sold separately)
To subwoofer
output
To front output
To rear output
Front speaker
Rear speaker
Rear speaker
Subwoofer
Subwoofer
1.5 m (4 ft. 11 in.)
Connecting the unit English
Connecting the unit English
When using a subwoofer without using the optional amplifier
Yellow
Connect to the constant 12 V supply terminal.
Red
Connect to terminal controlled by ignition switch (12 V DC).
Orange/white
Connect to lighting switch terminal.
Yellow/black
If you use an equipment with Mute function, wire this
lead to the Audio Mute lead on that equipment. If not,
keep the Audio Mute lead free of any connections.
Black (chassis ground)
Connect to a clean, paint-free metal location.
Blue/white
Connect to system control terminal of the power
amp or auto-antenna relay control terminal (max.
300 mA 12 V DC).
Front speaker Front speaker
White Gray
Gray/blackWhite/black
Green Violet
Green/black Violet/black
1.5 m (4 ft. 11 in.)
Wired remote input
Hard-wired remote control adaptor can
be connected (sold separately).
Fuse (10 A)
AUX jack (3.5 ø)
IP-BUS input (Blue)
IP-BUS cable
Front output
Antenna jack
USB cable
Connect to separately sold USB device.
This product
Rear output
Multi-CD player
(sold separately)
Subwoofer output
Use a stereo mini
plug cable to connect
with auxiliary device.
Microphone input
14 cm (5-1/2 in.)
Microphone
4 m (13 ft. 1n.)
Left Right
Green Violet
Green/black Violet/black
Subwoofer (4 Ω) Subwoofer (4 Ω)
When using a subwoofer of 70 W (2 Ω), be sure to connect with Violet and Violet/black leads of this unit.
Do not connect anything with Green and Green/black leads.
Subwoofer
(4 Ω) × 2
Not used.
Note:
Change the initial setting of this unit (refer to the Operation
Manual). The subwoofer output of this unit is monaural.