Filter
Top Products
17
Input Setting [VCR1/VCR2]
To view videos by a VCR, DVD player or any other kind of equipment connected to the
hide-away unit.
1. Display a menu screen and select [INPUT SETTING] menu.
(Refer to page 14.)
2. Choose between [VCR1] and [VCR2].
3. Select a connection mode.
Select the connection mode of the source external unit to the right of [VCR1] or [VCR2].
Each press of the 2 or 3 button selects the source in the following order:
VCR1: [VIDEO] = [S-VIDEO] = Exit to [VIDEO]
VCR2: [NO SELECT] = [VIDEO] = [S-VIDEO] = Exit to [NO SELECT]
Note:
• If the equipment is connected to a RCA video input, choose [VIDEO] to view video of the equip-
ment. (Refer to page 24.)
• If the equipment is connected to a S-VIDEO input, choose [S-VIDEO] to view video of the equip-
ment. (Refer to page 24.)
• If [VCR2] (NO SELECT) is chosen, the display and built-in speaker will not switch to [VCR2].
SELECT
VCR1
VCR2
NO SELECT
S–VIDEO
INPUT SETTING
SELECT
VCR1
VCR2
NO SELECT
VIDEO
INPUT SETTING
Operating the Setup Menu