Filter
Top Products
En
11
Using the equalizer
The equalizer lets you adjust the equalization to
match car interior acoustic characteristics as
desired.
Recalling equalizer curves
There are six stored equalizer curves which you
can easily recall at any time. Here is a list of the
equalizer curves:
Display Equalizer curve
SBASS Super bass
PWRFL Powerful
NTRL Natural
VOCAL Vocal
CSTM Custom
FLAT Flat
• CSTM is an adjusted equalizer curve that you
create.
• When FLAT is selected no supplement or
correction is made to the sound. This is useful
to check the effect of the equalizer curves by
switching alternatively between FLAT and a set
equalizer curve.
Press EQ to select the equalizer.
• If the equalizer has been previously set to an
equalizer curve other than PWRFL then the title
of that previously selected equalizer curve will
be displayed, such as SBASS, NTRL, VOCAL,
CSTM, or FLAT.
Adjusting equalizer curves
You can adjust the currently selected equalizer
curve setting as desired. Adjusted equalizer
curve settings are memorized in CSTM.
1 Press AUDIO
to select the equalizer mode.
Press
AUDIO until EQ appears in the display.
2 Select the band you want to adjust with
2/3.
L (low) —M (mid) —H (high)
3 Press 5 or ∞ to adjust the equalizer curve.
Each press of 5 or ∞ increases or decreases
the equalizer curve respectively.
• +6 – –6 is displayed as the equalizer curve is
increased or decreased.
• The actual range of the adjustments are differ-
ent depending on which equalizer curve is
selected.
Note
• If you make adjustments when a curve other
than CSTM is selected, the newly adjusted
curve will replace the previous curve. Then a
new curve with CSTM appears on the display
while selecting the equalizer curve.
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Press AUDIO to select LOUD.
Press AUDIO until LOUD appears in the display.
Audio Adjustments