Mounting Location
7 Example 1: Mounting on a rear
window (Fig. 1)
1. Clamps
7 Example 2: Mounting on a hatchback
window (Fig. 2)
1. Clamps
When mounting on a hatchback win-
dow, use clamps where necessary to
assure the cable is not stretched or does
not cause an obstruction when the hatch
is opened or closed.
7 Example 3: Mounting on a rear side
window (Fig. 3)
1. Clamps
Note:
• Install the antenna on the window on the driver’s
side of the car.
• Do not install with the antenna elements together
as this reduces reception sensitivity.
Warm the window glass when the
air temperature is low.
To prevent a reduction in adhesive strength ON
the car heater or rear defogger to warm the glass
to a temperature of 20˚C or more.
1
1
1
15
Installation