Filter
Top Products
35
Initial Setting
Setting the AM Tuning Step (AM STEP)
The tuning step employed in the tuner’s AM band can be switched between 9 kHz and
10 kHz per step. Reset the tuning step from 9 kHz (the factory preset step) to 10 kHz when
using the tuner in North, Central or South America.
Specifications Initial Setting New Setting
Tuning Steps 9 kHz 10 kHz
Frequency range 531 – 1,602 kHz 530 – 1,640 kHz
Setting the Warning Tone (WARN)
You can switch the Warning Tone function ON/OFF. (Refer to “Warning Tone” on page
32.)
2. Switch the Warning Tone
ON/OFF with the 5/∞ but-
tons.
1. Press the FUNCTION button and select the Warning Tone mode (WARN)
in the Initial Setting Menu.
2. Select the desired tuning step
with the 2/3 buttons.
1. Press the FUNCTION button and select the AM Tuning Step mode
(AM STEP) in the Initial Setting Menu.