Pioneer S-FL1 Car Speaker User Manual


 
5
En
English
b After inserting the connector fully, turn
clockwise to lock it in place.
After connecting, gently pull the connector to make
sure that it is securely connected. Improper
connection can be a cause of noise or other
problems.
Disconnecting
Squeeze the lever on the speaker connector with your
thumb, then twist the whole connector counter-
clockwise and pull out.
Moving the speaker
A carrying handle is provided on the top side of the
speaker (when horizontal). Use this if you need to move
the speaker short distances.
Connecting another speaker
On the rear of the speaker are two terminals; you can use
these to connect another speaker of the same type to this
speaker.
The number of speakers you may connect will vary
according to the impedance rating of the amplifier.
See the manual that came with your amplifier for
more details.
The diagram below shows the wiring of two
connected speakers.
1
2
Amplifier
S-FL1 S-FL1
+
1+
1–
8
1+
1–
Amplifier
1+1+
1–
8
1–
S-FL1 S-FL1
01 speaker system.fm 5 ページ 2005年8月3日 水曜日 午前11時35分