Filter
Top Products
Other connections06
24
En
Chapter 6
Other connections
Connecting auxiliary
components
This system has both stereo analog inputs and
outputs. Use these to connect external
components, such as your VCR, MD or CD-R
recorder.
1 Connect the LINE (AUDIO IN) jacks to the
analog outputs of an external playback
component.
Connect using RCA pin-plug stereo cables.
2 Connect the LINE (AUDIO OUT) jacks to
the analog inputs of an external recording
component.
These include components such as a cassette
deck, VCR, MD, or another recorder with
analog inputs. Connect using RCA pin-plug
stereo cables.
Recording mode
The Recording mode allows you to make
surround-compatible analog recordings from
the
LINE
(AUDIO OUT)
jacks.
1
Dolby
multichannel sources will be downmixed to
stereo for improved playback with systems that
can provide matrix-decoding (like Dolby Pro
Logic).
1 Press
SOUND MODE
.
2 Use
/
(cursor left/right) to select REC
MODE then press
ENTER
.
3 Use
/
(cursor up/down) to select
MODE ON or MODE OFF then press
ENTER
to
confirm.
•
MODE ON
– Multichannel sources are
downmixed to stereo for recording (the
same downmix is heard through the front
speakers and the subwoofer).
•
MODE OFF
– For regular multichannel
playback through your speaker system
(only the front left and right channels are
output from the line output).
AUDIO
IN
R
L
OUT
R
L
SPEAKERS
T
RL
RL
FRONT
SURROUND
LINE
Y
C
B
/
P
B
C
R
/
P
R
AUDIO
INPUT
AUDIO
OUTPUT
Tape deck, etc.
XV-DV250/350
Note
1• When Recording mode is on, most sound features cannot be used. The display will briefly blink
REC MODE
if you try and
use a prohibited function while Recording mode is on.
• When Recording mode is off, the audio from the
LINE (AUDIO OUT)
jacks may be interrupted, depending on the operation.
• The Recording mode switches off if you change the input function (
DVD/CD
,
TUNER
, etc.) or switch the power off.
XV-DV250-350.book 24 ページ ２００５年１月３０日 日曜日 午後５時５４分