Filter
Top Products
Controls and displays
02
17
En
English Italiano Français
Nederlands
EspañolDeutsch
Wireless speaker system
1 CHANNEL indicator
Lights to indicate the selected channel.
2 CHANNEL button
Press to select a frequency channel. The
frequency channel changes sequentially
each time the button is pressed:
3 Antenna
Transmits signals to the XW-DV515 wireless
speaker.
4 Wireless speaker antenna
Receives signals from the transmitter.
5 TUNED indicator
Lights when the signal from the transmitter is
properly received.
6 AUTO indicator
Lights when AUTO is selected.
7 POWER button
Press to switch the speaker on or off.
8 WIRELESS MODE switch
Selects between SURROUND or STEREO.
See Using the wireless surround speaker on
page 36 for more on this.
• Make sure to stop/turn off the source and
switch off the wireless speaker when
switching speaker systems. The wireless
speaker will output the source at very loud
volumes if the wireless speaker is set to
SURROUND and the main unit is set to
W.Stereo. In this case, the volume
control has no effect, so please follow
these precautions.
9 CHANNEL (AUTO ON/OFF) button
The default setting is AUTO, where the
channel is automatically set to the same one
selected on the transmitter. If you find that the
reception is weak, try switching to AUTO OFF.
This 'locks' the signal and can result in better
reception.
Press and hold for about 5 seconds to switch
between AUTO and AUTO OFF.
TUNED
POWER WIRELESS
MODE
STEREO MODE
VOLUME
CHANNEL
SURROUND STEREO MIN MAXAUTO ON/OFF
OFF ON
AUTO
POWER WIRELESS
MODE
VOLUME
CHANNEL
SURROUND STEREO MIN MAX
1
2
3
4
AUTO
MANUAL
OFF ON
CHANNEL
OFF ON
POWER WIRELESS
MODE
STEREO MODE
VOLUME
CHANNEL
SURROUND STEREO MIN MAXAUTO ON/OFF
OFF ON
CHANNEL
wireless
Digital
speaker system
wireless speaker
Transmitter
54 6
7 8 9
10 11
1 2 3
CH 1 CH 2 CH 3 CH 4
Controls_and_displays.fm 17 ページ ２００３年２月２８日 金曜日 午後４時２７分