Filter
Top Products
Quick Installation
1.
Connect either VGA, DVI, HDMI or DisplayPort Video Source from the monitor to the
computer. Make sure both monitor and computer are powered OFF. Please note. The
monitor ships with DisplayPort and HDMI cables only. DVI-dual link, or VGA cable may be
sourced separately from a cable supplier.
2. Connect the audio cable from audio output of computer to the audio input of the monitor.
3. Connect the earphone to the earphone output terminal of the monitor. (Earphone sold
separately).
4. To enable the USB 3.0 Hub, connect the USB 3.0 cable from the computer to the monitor.
5. Connect power cord to a properly grounded AC outlet, and then to the monitor.
6. Power-ON computer and then POWER-ON the monitor.
7. Set the timing mode on your computer. Recommended resolution and refresh rate is
3840 x 2160 @ 60Hz for DisplayPort and 3840 x 2160 @ 30 Hz for HDMI.
Figure:
Earphone
(not supplied)
PC
Audio cable
(not supplied)
USB 3.0 cable
Power cable
VGA cable
(not supplied)
HDMI cable
Dis
p
la
y
Port cableDVI cable
(not su
pp
lied)
9