10 LX0801PTI/ LX1201PTI/ LX1501PTI - IP-65 Touch Monitors User’s Guide (020-0982-00A)
Installation
Before Installing
Keep the following in mind while installing the monitor:
The monitor should be visible to the driver only if it is used for navigation, •
system control or vehicle information. If the monitor will be used for other
purposes, it should be installed in such a way that it will only operate while the
watercraft is not moving.
Review all applicable federal, state and local laws and regulations to make sure •
the monitor is used properly and safely.
The installed monitor must not interfere with the driver’s vision.•
Installing the monitor consists of three steps:
Attaching the monitor using one of the mounting interfaces built into the 1.
monitor’s enclosure.
Connecting the monitor to the computer and power source.2.
Installing the touchscreen driver software. 3.