Filter
Top Products
LX1250TI User Manual 11
Using the display:
1. Once installed and cabled. The display is ready to use.
2. Apply system power.
3. Display & Touch screen are active
Using the Touchscreen
1. The LX1200TI touchscreen allows you to operate the computer by touching the screen with a
I nger or stylus, rather than using a mouse or keyboard.
2. Navigating the Touchscreen
• To click an item, tap the item once.
• To double-click an item, tap the item twice rapidly.
• To drag an item, touch the item, and then drag it along the screen to the new location.
3. To move the cursor, touch the screen and move the cursor as needed.
Using Remote OSD features:
This is an advanced feature and should only be attempted by qualified individuals.
The display allows for remote PC management. The display is controlled via the USB interface. The
controlling PC requires a virtual COM port to operate the display. Drivers for the Display Virtual
comport can be found here:
http://www.ftdichip.com/Drivers/VCP.htm
http://www.ftdichip.com/Drivers/D2XX.htm
Commands for control are as follows:
2.1 Display Control Serial Commands/Queries
The display must support the following commands and queries using a protocol compatible with the
Pixel works PW Host protocol.
Support required for Phase II and beyond.