Filter
Top Products
8
Basic Operation and Calibration/Reset Instructions
Before using the Touch LED LCD Monitor:
Connect external equipment properly.
Insert the power plug, and the power LED indicator will light orange.
Power On/Off
To turn the Touch LED LCD Monitor on/off:
Press button on the front. The power LED indicator light will be blue when the Touch LED
LCD Monitor is on.
Using the OSD Menu
Use OSD menus to adjust settings by using the menu button on the front of the Touch LED LCD
Monitor.
Displays main menu
Selects between VGA, HDMI, DisplayPort or Auto mode
Exits from OSD menu
Select the desired item when in OSD menu
When not in OSD menu, directly enters Audio Adjust menu, press 3
seconds enters Auto Image Adjust.
Select the desired item when in OSD menu
When not in OSD menu, directly enters Audio Adjust menu, press 3
seconds enters Mute mode.
+
Recalls both Contrast and Brightness (when not in OSD menu)
OSD Lock Out Function
When Touch LED LCD Monitor is in normal mode, the “OSD Lock Out” function can be enabled.
Option 1: OSD lock – all 4 buttons are locked except the “POWER” button.
Press and hold the
button and the button for 5 seconds to lock the OSD
buttons.
The Touch LED LCD Monitor will show an “Locking OSD” message for 3 seconds and the
message will disappear automatically.
Repeat this step to unlock.