Planar PLL2770W Car Video System User Manual


 
9
Quick Installation
1.
Connect either VGA or DVI Source from the monitor to the computer. Make sure both
monitor and computer are powered OFF.
2. Connect power cord to an AC/DC power adapter, and to a properly grounded AC outlet,
and then to the monitor.
3. Power-ON computer and then POWER-ON the monitor.
4. Set the timing mode on your computer. Recommended resolution and refresh rate is 1920 x
1080 @ 60Hz.
Figure 1:
VGA cable
DVI cable
PC
AC/DC Power
ada
p
ter
AC Power cable