Planar PT1700MX Car Video System User Manual


 
25
PT1700MX Optional Calibration Tool Install:
If you would like to use the Optional Calibration Tool, follow the instructions
below. Please note: the calibration tool supports Windows
®
7/8, VISTA, XP
and XP Embedded operating systems via USB only.
1.
Visit www.planar.com/support.
2. Select the monitor size and then model name.
3. Click on the “Load Utility” button that appears to the right of the model name.
4. The HID calibration tool will automatically open. From here the user can
choose to do the following:
a. 4 Points Calibration
b. 9 Points Linearization
c. 25 Points Linearization
d. Clear
e. Draw Test
f. Advanced. In the Advanced settings area the user may do the following:
i. Adjust the Double Click Area.
ii. Enable auto right click and adjust the auto right click time.
iii. Choose to be either in the HID Mouse Mode or HID Digitizer Mode
(Windows
®
Vista and Windows
®
7 and Windows
®
8).
iv. Simply click the “Apply” button once the settings are finalized.
18