Filter
Top Products
Page- 17
Setup Menu
• Press SETUP button to enter the system settings main menu;
• Press cursor
/ buttons to move along icons on the top navigation bar on settings main menu.
Select one of the setup pages: General, Speaker, Downmix, Audio;
• Press cursor
/ buttons to choose a setting or return to the Setup Page;
• Press cursor
button to enter the highlighted setting;
• Press ENTER button on remote contro confirm your setting.
General settings
Speaker settings
Menu
entry
Function
Downmix
Here you can set the format in
which the DVD sound should
be played back. STEREO =
analog stereo signal RIGHT /
LEFT = Dolby Pro Logic stereo
signal (2 channel sound)
SURROUND = Virtual
surround sound If STEREO
has been switched on,
“STR“ will appear, for RIGHT /
LEFT, “LTRT“ will appear, and
for SURROUND, “VSR“.
Menu
entry
Function
TV
Display
Here you can adjust the output
format for the DVD playback
according to your preferences.
Angle
Mark
This function is indicated in
the device menu but not
supported by the device.
OSD
language
This menu item allows you to
set the language of this menu.
Captions
This function displays
subtitles as long as those are
available on the data carrier
and the function is activated.
Screen
Saver
Chose ON or OFF about last
memory ,chose ON ,turn off the
sreen the memory will be
save,chose OFF turn on the
unit will be back to the default
setting .