Filter
Top Products
13
DSP - The unit is equipped with 4 preset equalization modes. Press the SEL button
for more than 2 seconds to display DSP OFF. Then turn in
the clockwise direction to choose one of 4 following preset EQ s in the
following order.
When using preset EQ modes you will not have access to Bass and Treble
settings.
DSP OFF
BEEP - The beep sound when you press a button on the unit can be turned on or
off. Press the SEL button for more than 2 seconds to display the DSP
function. Press the SEL button again momentarily to display BEEP ON/OFF.
Then use to turn on/off the beep sound.
SET VOL - A certain volume level can be set to come on when the unit is turned
on or can be set to come on at the same last level before the unit was
turned off. Press the SEL button for more than 2 seconds to display
the DSP function. Press the SEL button four times momentarily to
display VOL LAST/ADJ. Use the VOL knob 5 to choose between
VOL LAST and VOL ADJ. To set the volume to a certain level, press the
SEL button momentarily when VOL ADJ is displayed. Then use the VOL
knob 5 to adjust to certain volume level when A-VOL is displayed.
Press the SEL button for more than 2 seconds to display additional set of functions
for adjustments, such as DSP, Beep On/Off, Seek 1 or 2 , Clock 12 or24, and
Volume Last/Adjust.
the VOL knob 5
FLAT CLASSIC ROCK POP
the VOL knob 5
SEEK- The unit is equipped with two types of seeks, SEEK 1 and SEEK 2, for radio
stations. Press the SEL button for more than 2 seconds to display the DSP
function. Press the SEL button twice momentarily to display SEEK 1 or 2.
Then use the VOL knob 5 to switch between SEEK 1 and SEEK 2. (This
adjustment is only available during radio operation)
SEEK 1 mode: Pressing 8 or 9 button for more than 2 seconds will seek
up or down to the next strong station during radio operation.
SEEK 2 mode: Pressing 8 or 9 button continuously will speedily change
station up or down until the button is released.
CLOCK- The unit is equipped with two types of clock formats, 12 hour and 24 hour.
Press the SEL button for more than 2 seconds to display the DSP function.
Press the SEL button three times momentarily to display CLOCK 12 or 24.
Then use the VOL knob 5 to choose between 12 and 24 .
,
I
I
I
I