Filter
Top Products
Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer Quick Start Guide 39
• If you are using a 2D imaging scanner, make certain the red,
oval-shaped framing mark is centered within the bar code you
want to scan.
• Hold the scanner farther away for larger bar codes.
• Hold the scanner closer for bar codes with bars that are
close together.
2.7.1 Scan LED Indicators
The 8525 G2/8530 G2 scanner LED (the upper-right LED) indicates
whether or not your scan is successful. Keep in mind that scan indi-
cators only function when using a non-decoded 1D laser scanner
connected to the tether port. All other external scanners have inte-
grated LED indicators that are not controlled by the 8525/8530 G2.
The LED behaves as follows:
• Scan In Progress: scan LED displays solid red colour.
• Successful Scan: scan LED displays solid green colour and
turns off when the scan is ended.
• Unsuccessful scan: scan LED flashes red.
A bar code icon appears on the screen during a scan. While the scan-
ner beam is active, the onscreen message states – SCANNING. If the
scan is successful, the bar code data is displayed on the screen until
the scan trigger is released.
3. Navigating In Windows CE
Graphic user interfaces like Windows CE for portable devices and
desktop Windows (2000, XP, etc.) utilize ‘point and click’ naviga-
tion. An equivalent keyboard shortcut is also available for every
‘point and click’ action.
Windows CE supports the same ‘point and click’ user interface and
keyboard shortcuts as desktop Windows with one difference – the
‘point and click’ action is accomplished using a touchscreen rather