Filter
Top Products
3
4
AV Display Mode:
Operating method: Press the button“AV1/AV2” on the remote
control unit to choose AV display mode. If the VCD or DVD
signal is connected, there should be display normally pictures
signal ;If the VCD or DVD signal isn't connected, AV character
should be appear top the left corner and the screen is blue..
the system will display “NO SIGNAL”.
1. BRIGHTNESS
2.
3.
4. TINT(only NTSC system)
5.
. SCALING(16:9/4:3)
COLOR
CONTRAST
LANGUAGE
6
The above functions can be executed by MENU on the display
or remote control unit.
1. Brightness: Press the MENU button on the display or MENU on
the remote control unit, then press: “ ” “ ” button on the
display or “ ”” ” keys on the remote control unit to choose
what you need.
2. COLOR: Press the MENU button on the display or MENU on the
remote control unit thrice , then press: “ ” “ ” button on the
display or “ ” “ ” keys on the remote control unit to choose
what you need.
3. Contrast Ratio: Press the MENU button on the display or MENU
on the remote control unit twice, then press: “ ” “ ” button on
the display or “ ” “ ” keys on the remote control unit to choose what
you need.
4. TINT：Press the MENU button on the display or MENU on the
remote control unit four times , then press: “ ” “ ” button on
the display or “ ” “ ” keys on the remote control unit to
choose what you need0
5
.
6. scaling: Press the MENU button on the display five times , then
press: “ ” “ ” button on the display to choose .
．
“ ”“ ” “ ”“ ”
Language : please press the manual of unit or the remote control six
times, then press on the unit or on the remote
control to select you need.
Remote Control