PYLE Audio PLCD25 Car Stereo System User Manual


 
DISC PLAY:
Cleaning discs
Before playing, clean the disc with a clean, lint-free.
Flip the disc in the direction of the arrow.
NOTE:
. Do not use so solvents such as benzine, thinners. Commercially available
cleaners or anti static spray damage the unit.
Insert a disc with the label surface down. Doing so may damage the unit.
NOTE:
. Do not try to insert another disc when one has been already inserted.
Doing so may damage the unit.
Label
surface up
.Handle the disc by its edge. And to keep the disc clean, do not touch
the surface.
.Do not stick paper or tape on the disc.
.Do not expose the disc to direct sunlight or heat sources such as hot air
ducts. Or leave it in a car parked in direct sunlight where there can be a
considerable rise in temperature.
IMPORTANT:
MEMORY WIRE ( FOR BACKUP) AND POWER WIRE CAN NOT BE SWITCHED
OFF AT THE SAME TIME, ONCE IT HAPPENS, ALL THE FUNCTION WILL BE
TOTALLY IN DISORDER (DISTORTED DISPLAY IS ALSO INDICATED ).
PLEASE FOLLOW THE INSTRUCTIONS AS MENTIONED
BELOW:
PLEASE SWITCH ON THE MEMORY WIRE FIRST (CAN NOT
PASS THROUGH IGNITION SWITCH) AND THEN SWITCH ON THE POWER. IT WILL
RETURN TO NORMAL FUNCTION SOON.
IF IT REALLY HAPPENS,
5 MINUTES LATER,
16. LUD/RDM BUTTON
LUD MODE:
When reduce the volume to half level, press it to enhance the bass effect.
RDM MODE:
During CD mode, press " RDM " button and hold for 2 seconds,
it display " RDM " and Random function performs.
15. LOC/RPT BUTTON
LOCAL/DISTANCE MODE:
REPEAT MODE:
During CD mode. Press RPT button to repeat a single track.
Attention: During AM mode, LOC is non-functional.
When in the radio mode, press them to select local or distance broadcast
station receive sensitivity. The word LOC will appear on LCD during local
state.
14. MO/INT BUTTON
MO MODE: Press it to select mono or stereo mode.
INT MODE:
During CD mode, press " INTRO "button to hear the first 10 seconds
of each track on the disc. Press this button again to restore the
player to its normal play mode.
17. TRACK UP/DOWN BUTTONS
B. During CD mode, press button allow you to track backwards.
Hold the button allow you to skip backwards.
A. During CD mode, press button allow you to track forwards.
Hold the button allow you to skip forwards.
13. BAND BUTTON
Press it to select your desired radio band and the band which is selected will
be displayed on LCD.