PYLE Audio PLD57MU Car Stereo System User Manual


 
BASIC OPERATION
12
6. EQ BUTTON
Swing the SEL knob in the direction of the EQ to turn to equalization function and
to select desired audio mode. There are four kinds of mode as below:
JAZZ CLAS POP ROCK
8. MU BUTTON
Press it button to switch of the loudspeakers for a short period. The word MUTE
flashes in the display. Press it again to cancel the mute function. This function
can also be cancelled by rotating the VOL multifunction button.
9. (ANGLE)BUTTON
you can change the viewing angle of the operating unit . Press this button up to
four times in order to select the desired position.
10. BUTTON
Press the button to interrupt playback of the CD (pause function). Press this
button again to cancel this function.
11. / BUTTONS (TUNE, SEEK, TRACK, SKIP UP/DOWN)
a).In DISC, USB mode:
if you wish to jump forwards or backwards press the SEL button (4) briefly in
the or direction. (Note: in DVD mode, press the SEL button continually
twice in direction to skip back one track during playback.)
Note:For some VCD 2.0 dics(PBC-playback control), and buttons may
be unavailable.
7. APS/DISP BUTTON
a) Memory function:
swing the SEL knob in the direction of APS/DISP for approximately 2 seconds
to active automatic station storage. The radio searches within the current
frequency band, e.g. FM1, for the strongest station are then allocated to the
corresponding storage locations. Then the station of the first storage location
is set. If you would like to search for more stations in the FM band, press the BND
button(5) in order to change to the FM2 or FM3 band. Swing the SEL button (4)
again in the APS/DISP direction for about 2 seconds to continue search.
b) Scan Function:
if the SEL knob is moved briefly in the direction of APS/DISP, the radio briefly
plays all the preset stations of the frequency band. (The scan function ends
automatically at the first storage location of frequency band FM1.)
swing the SEL knob briefly in the direction of the APS/DISP on the front panel ,
the playback picture (the monitor on the unit only) will not to be shown, only the
audio will be heard. (Swing it again to resume the playback picture mode.) You
can press SEL knob briefly to select the “BG COLOR” by repeatedly pressing the
SEL knob, then rotate the VOL+/- to select the background color among of the
“AUTO, BG COLOR: 01........BG COLOR: 11”, in “ AUTO” mode, the monitor of
unit will change the background color automatically.
In Radio Mode:
In Disc Mode: