Filter
Top Products
16
BASIC OPERATION
REAR VIEW CAMERA
When connecting the rear view camera.the mirror image of the rear view through
the rear view camera is automatically displayed on the monitor when you change
the gear to the back position.(The monitor on the unit only.)
if the parking brake is not engaged,“parking brake” flashes on the monitor,
and no playback picture will be shown. Only the audio will be heard.
-This warning appears only when the parking brake wire is connected to the parking
brake system built in the car. (See page .8)
NOTE(for the brake function)
MPEG4DISCPLAY
MPEG4 disc is playing as the format
of FILE . For example:
/
In stop mode , use / on the
remote control to select the item ,
then press ENTER button to confirm.
Pressing REPEAT button repeatedly can
select three kinds of repeat play mode.
REP-ONE:
Play the same song over and over again.
REPEAT ALL:
Play all songs in the current directory in sequence, over and over again.
DISC REPEAT:
Play all songs in the discover and over again.
In the playback, use or to skip an item ahead or back.
In the playback, face right or left swing the SEL knob / button on the front panel
and keep more than 2 seconds or short press on the remote control to rapid
forward/reverse.
00:56 04:07
001/001
Repeat one
..............
MAY-AUG
C14-Long-fright
COLOR: 0 to 32
Adjust the color fo the picture-lighter or darker.
BRIGHT:0to32
Adjust if the picture is too bright or too dark.
CONTRAST: 0 to 32
Adjust the contrast of the bright ans dark portion.
TINT:0to32
Adjust the tint if the human skin color is unnatural.
-Adjustable when “NTSC is selected for NTSC/PAL“““.
(The function of the VOLUME, BASS, TREBLE, BALANCE and FADER, Please
see page 11.)
ADJUSTABLE ITEMS:
TFT MONITOR OPERATION
Tint Contrast Bright Color
Volume Bass Treble Balance Fader
Press SEL 4 button briefly to across the sound/picture mode selection menu
by repeatedly pressing the SEL button you can select the individual menu items
such as volume, bass, treble, balance, fader, color, bright, contrast and tint .
Then rotate the VOL + / - to adjust the selected mode.
(The corresponding value will show on the display.)
When mode has not been adjusted for several seconds, display returns to normal
radio or CD display.
()