Filter
Top Products
1.8 UNIT INSTALLATION
Description ofCo nnecting the Parking BrakeLine tothe Parking BrakeSystem Built in theCar
Parkingbrake
Parking brakeswitch
(insideth eca r)
Parking brakeline(green)
Tometallicbodyor chassisofthecar
NOTE: after connecting the ParkingLine, the video on thesmall monitorof thefront panel will bedisplay onlyafter br aking thecar.
INSTALLATION INSTRUCTIONS
DASHBOARD
PLASTICFRAME
1)REMOVE THE 2 DECK TRANSPORT SCREWS BEFORE INSTALLATION.
2)PLEASEDOTHECONNECTION OFTHEPOWER,SPEAKERSANDANTENNA
ACCORDINGTO THEREQUIREMENT OFTHEINSTRUCTIONBOOK .
3)IF THELEFTANDRIGHTINSTALLATION BRACKETSSUPPLIEDBYFACTORY
AREFIT FORYOURCAR,PLEASE FIX THEM ONTHECHASSIS ANDTHEN
FIXTHE UNIT IN THE CAR WITH SCREWSACCORDING TOTHEFOLLOWING
DIAGRAM; OTHERWISE, PLEASE USE THE LEFT AND RIGHT INSTALLATION
BRACKETSSUPPLIEDBY YOURCARSUPPLIER.
RIGHT INSTALLATION BRACKET
LEFTINSTALLATION BRACKET
COMPLETEDUNIT
TRANSPORTSCREWS
3. During IMAGE playback, press one of the >/</^/v buttons to change the angle of
viewing picture that is displaying as follows:
>: 90 deg cw; <: 90deg ccw; ^:UP<-->DOWN; v: LEFT<-->RIGHT
During IMAGE playback, press the PROG button to change the mode of refresh picture.
During IMAGE playback, press the STOP button to stop playing and return to the root
menu.
* During IMAGE playback, the following buttons are not available: SLOW-FWD,
SUBTITLE, TITLE, ANGLE, AUDIO, RDM, INT and A-B.
* In IMAGE mode, the other operations are same as ones in MP3/WMA mode.
1. The root menu is displayed on TV when beginning to switch on Mp4 mode, then it will
automatically play the first file.
During playback, press the STOP button to stop playing and return to the root menu.
2. When displaying the root menu, press the direction buttons to select your desired
FOLDER ,file or file sort icon, then press the OK or PLAY button to open the FOLDER,
open the files of the file sort icon or play the selected file.
When displaying the root menu, you can also use the number buttons to select the
serial number of the file and play the file.
* The ANGLE, PROG, RDM, INT and TITLE/PBC button are not valid.
* The other functions are same as ones in DVD mode; but the RPT function is same as
one in MP3/WMA mode.
There is ESP function for all formats of discs.
In MP3/WMA mode, during playback, the information of the file name, folder name,
will be scrolling on the LCD display. As long as the
current playing music contains relevant tag information in version 1.0/2.0
format, the 3 items underlined above will be scrolling on the LCD display; otherwise,
they will not.
1. Press the SETUP button on the remote control to access the DVD System Menu on
the monitor.
2. There are 6 setup pages in all for the System Menu. Press the > or < button to select
an desired setup page.
3. Press the ^ or v button to select an setup item in the selected setup page.
4. Press the > button to enter the setup item. Then press the v or ^ button to select a
desired mode of the setup item, finally press the OK button to confirm it.
* Press the < button to return to the upper level.
* Press the SETUP button again or use the direction buttons to highlight the item of the
EXIT SETUP and then press the OK button to exit the System Menu.
4.22 Playback MP4 files
4.23 ESP and Function
song s title, artist and album
4.24 The DVD System Menu Setup Operation
ID3
MP3 ID3
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com