Filter
Top Products
23
appears on the display, you can press
“1 “button then press “6” button to
select 16 channel.
• Mute
Press MUTE button on remote control
to cut down sound output.
Press it again to resume the previous
volume mode.
• Screen display
Press TITLE (DSP) button on remote
control to display the current status
such as TVch. If you don’t operate over
five seconds, the information on the
screen will disappear.
• Menu Control operation in TV
mode
Press SEL button on remote control
to enter sound menu, then you can
press CH
/ buttons to select the
item upward or downward. Then
press VOL+/- buttons to adjust the
selected item. The corresponding
value will show on the display.
OPERATION
AV OPERATION
• Switching to AV mode
On the back of the unit, there is a pair
of AUDIO/VIDEO INPUT jacks. When
you connect an audio/video system
through these jacks, press MODE
button on remote control to select AV
mode.
• Menu Control operation in AV mode
Press SEL button on remote control to
enter sound menu, then you can press
CH
/ buttons to select the item
upward or downward. Then press
VOL+/- buttons to adjust the selected
item. The corresponding value will
show on the display.
• Mute
Press MUTE button on remote control
to cut down sound output. Press it
again to resume the previous volume
mode.
RGB OPERATION
• Switching to RGB mode
When you connect the RGB terminals
on the back of the DVD unit to the
corresponding RGB system, then
press MODE button on remote control
to select RGB mode, the RGB signal
will appear on the screen.
Note: When you press MODE button
to select RGB mode and there hasn’t
any RGB signal input, then there is
nothing to display on the screen.
VOLUME 40
BASS -2
TREBLE -2
BALANCE L-R
FADER R-F
LOUD ON
EQ POP
VOLUME 40
BASS -2
TREBLE -2
BALANCE L-R
FADER R-F
LOUD ON
EQ POP