Filter
Top Products
LOCATION AND FUNCTION OF CONTROLS
1. SEL( AUDIO MODE SELECT)/VOLUME +/- BUTTON
Press SEL button to change the mode in the sequence of
BAS TRE BAL FAD VOL
1). The volume level can be adjusted at any time by pressing the audio level+ or
- button as select mode has been initially defaulted at volume mode.
2). The volume level is also obtained by stepping through the SEL button until
the function VOL is displayed and then press + or - button to adjust the
sound level.
3). Press and hold the + or - button to adjust the sound level.
BASS CONTROL
1). Press the SEL button to select the bass mode until BAS appears on the display.
2). Press + or - to adjust the bass effect.
3 8
SPECIFICATION
GENERAL
Power requirement..............................................................................................DC 13.8V.
Chassis dimensions.......................................................................183[W] X 53[H] X 165[D].
FM SECTION
Frequency range.....................................................................87.5MHz -108.0MHz(EUROPE).
Frequency range...........................................................................87.5MHz -107.9MHz(USA).
Usable sensitivity.........................................................................................................3uV.
I.F Frequency........................................................................................................10.7MHz.
AM(MW) SECTION
Frequency range........................................................................522KHz - 1620KHz(EUROPE).
Frequency range............................................................................. 530KHz - 1710KHz(USA).
LINE - OUT [OPTION]
Output...............................................................................1000mV @ FM 10% THD POWER.
Impedance............................................................................................................600 ohm.
CD PLAYER
System........................................................................................compact disc audio system.
Usable disc......................................................................................................compact disc.
Signal format.............................................................................sampling frequency 44.1KHz.
No of quantization bits 1bit.
Frequency characteristics...............................................................................5-40Hz < 5dB
10K-20KHz < 5dB.
Signal to noise radio................................................................70dB [1KHz] [IEC - A net work].
Number of channels..............................................................................................2 STEREO.
Current consumption..............................................................................................7A MAX.
Power output.........................................................................................................40W X 4
1 2 3
4 5 6 7
8 9 10 11 12 13 14
15 16 17 18 19 20
TREBLE CONTROL
1). Press the SEL button to select the treble mode until TRE appears on the display.
2). Press + or - to adjust the treble effect.
M3/INT
+
CLK
M
UTE
-
SEL
BND
M1/TOP
M2/RPT
OPEN
CDP
POWER
LUD
M5
M4/RDM
M6
LOC
APS
DSP
EJECT
+
-
Detachable Front Panel CAR Radio & CD Player
DIGITAL AUDIO
COMPACT
FLAT CLASS
ROCK
POP
TRACK
LOC LOUD MUTE DISC
CH
RPT
RDM
INT